GB/T 7330-1998 交流电力系统阻波器
作者:标准资料网 时间:2024-05-15 17:38:36 浏览:9670
来源:标准资料网
基本信息
标准名称: | 交流电力系统阻波器 |
英文名称: | Sheet metal formability and test methods |
中标分类: |
车辆 >>
车辆通用零部件 >>
螺塞、管件 |
ICS分类: |
|
替代情况: | 替代GB 7330-1987;被GB/T 7330-2008代替 |
发布部门: | 国家技术监督局 |
发布日期: | 1998-03-16 |
实施日期: | 1998-01-02 |
首发日期: | 1987-03-02 |
作废日期: | 2008-10-01 |
主管部门: | 中国电力企业联合会 |
归口单位: | 全国电力系统管理及其信息交换标准化技术委员会 |
起草单位: | 北京电力设备总厂 |
出版社: | 中国标准出版社 |
出版日期: | 2004-07-19 |
页数: | 16开, 页数:23, 字数:40千字 |
书号: | 155066.1-15365 |
适用范围
本标准规定了有关阻波器的定义、要求、试验方法及额定值。本标准适用于串接于高压交流输电线中的阻波器。该设备用以防止频率一般在40kHz~500kHz范围内的载波信号在电力系统各种条件下发生过度损耗,并使得来自邻近电力线载波系统的干扰降到最校本标准不适用于为其他目的连接在高压输电线上的电感器以及用于交直流换流站的阻波器。交直流换流站阻波器所在电力系统条件未在本标准中规定,有关资料见附录B(提示的附录)。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 车辆 车辆通用零部件 螺塞 管件
【英文标准名称】:Rubber,ethylene-propylene-diene(EPDM)-Evaluationprocedure
【原文标准名称】:乙丙烯二烯烃橡胶(EPDM).评定规程
【标准号】:BSISO4097-2000
【标准状态】:作废
【国别】:英国
【发布日期】:2001-03-15
【实施或试行日期】:2001-03-15
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:合成橡胶;试验设备;化学分析和试验;乙丙橡胶;物理试验;硫化;含量测定;二烯烃;试验条件
【英文主题词】:Chemicalanalysisandtesting;EPDM;Ethylpropylene;Evaluations;Interpretations;Referencematerials;Rubber;RubberEPDM;Testing;Tests;Vulcanization;Vulcanizedrubber
【摘要】:ThisInternationalStandardspecifies:—physicalandchemicaltestsonrawrubbers;—standardmaterials,standardtestformulations,equipmentandprocessingmethodsforevaluatingthevulcanizationcharacteristicsofethene-propene-diene(EPDM)rubbers,commonlytermedethylene-propylene-dienerubbers,includingoil-extendedtypes.
【中国标准分类号】:G34
【国际标准分类号】:83_060
【页数】:20P;A4
【正文语种】:英语
【英文标准名称】:StandardSpecificationforHeadedSteelBarsforConcreteReinforcement
【原文标准名称】:混凝土钢筋用有头钢棒的标准规范
【标准号】:ASTMA970/A970M-2009
【标准状态】:现行
【国别】:美国
【发布日期】:2009
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.05
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:
【英文主题词】:carbon-steelreinforcingbars;concretereinforcement;deformations(protrusions);headedreinforcement;headedreinforcingbars;integrally-forgedheadedreinforcingbars;low-alloysteelreinforcingbars;threadedheadedreinforcingbars;weldedheaded
【摘要】:1.1Thisspecificationcoversdeformedandplainsteelreinforcingbarsincutlengths,withaheadattachedtooneorbothends,forconcretereinforcement.Attachmentcanbeaccomplishedthroughwelding,byintegrallyhotforgingofaheadfromthereinforcingbarend,byinternalthreadsintheheadmatingtothreadsonthebarend,orbyaseparatethreadednuttosecuretheheadtothebar.Headsareforgeformed,machinedfrombarstock,orcutfromplate.Note18212;Thisspecificationisapplicableforheadedbarsproducedwithwelded,threaded,orforgedheadsandusedforreinforcementofconcretestructures.Therequirementsofthisspecificationarenotapplicabletoheadedbarswheretheattachmentoftheheadisaccomplishedbyalternatemeans.1.2Limitationsonheaddimensionsandonobstructionsandinterruptionsofbardeformationsonthenon-planarfeaturesonthebearingfaceoftheheadarepresentedinAnnexA1.TherequirementsinAnnexA1onlyapplywhenspecifiedbythepurchaser(see4.1.13).1.3ThisspecificationisapplicableforordersineitherSIunitsasSpecificationA970Morinch-poundunitsshowninthetextinbrackets[SpecificationA970].1.4ThevaluesstatedineitherSIunitsorinch-poundunitsaretoberegardedseparatelyasstandard.Thevaluesstatedineachsystemmaynotbeexactequivalents;therefore,eachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththestandard.1.5Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:H44
【国际标准分类号】:77_140_15
【页数】:7P.;A4
【正文语种】:英语